Offset bar with integrated umbrella
Flexibility: This shape combines the advantages of a central bar with the options of a freestanding solution. In addition, the space at the bar counter is enlarged. Since no back wall is present, the umbrella bar can be connected directly to existing building. Designed to match everything from rustic to highly elegant elements and including refinements such as backlit bar, lighting and sound effects.
Technical details
Umbrella type MV 7.0 x 5.0 m
Covered area: 35 m²
Umbrella with lifting device
Bar 3.8 x 1.9 m
One-piece, transportable by crane
Outside bar table: 7.7 m
Inside bar table: 3.5 m
Operating staff: 1-2 persons
Centrally setup bar in a round design
This umbrella bar type is successfully used in numerous design solutions and configurations worldwide. The main features at a glance: full bar furnishings – with the circular setup, all functional elements are in hand. The round bar offers space for guests and quick operation with a minimum of staff. The short base of the umbrella allows setup in difficult locations too.
Technical details
Umbrella MR Ø 8 m
Covered area: 48.7 m²
Bar round Ø 4.4 m
Special format: circular
Illuminated front
Bar = umbrella stand
Outside bar table length: 12.8 m
Inside bar table length: 7.4 m
Operating staff: 1-3 persons
Bar setup on the edge, accessible on both sides
Separation of the umbrella foundation and the bar structure allows greater flexibility in the design and simultaneously creates two centers where guests automatically gather. Thus, the space can be inconspicuously divided. The elongated shape of the bar that is accessible from both sides allows the offerings to be emphasized, for example with beverage dispensers and snack preparation. This umbrella bar type is designed with an integrated kitchenette and lounge area.
Technical details
Umbrella type MR 9.0 x 9.0 m
Covered area: 77.9 m²
Bar dimensions 6.5 x 2.7 m
Outside bar table length: 7.2 m
Iinside bar table length: 13,8 m
Operating staff: 1-3 persons
Sideways setup bar with asymmetrical umbrella format
Basically, the design and functional elements of the bar allow for a combination of a wide variety of umbrella sizes. When the bar and umbrella foundation do not form a unit, then there is even greater flexibility. At the same time, this solution enables the consideration of specific structural features, such as connections, add-ons, etc., without affecting the placement of the umbrella. But with the integrated solutions, operating elements can be directly attached to the umbrella stand.
Technical details
Bar dimensions 6.5 x 2.8 m
Outside bar table length: 16.7 m
Inside bar table length: 10.7 m
Individualized glass design as a backlit version
Operating staff: 2-5 persons
Power requirements: 400V/18KW
Bar setup in a corner, with angular basic shape
Lots of space, lots of function: this setup and shape of the bar is well suited for larger gastronomical units and flexible use of space, such as a temporary dance floor. The L-shape provides guests with more space, along with additional features and equipment on the large back wall. With the division of the system, this is better both visually and structurally, and can also be used from the outside.
Technical details
Bar dimensions 3.2 x 3.2 m
Angled, 2-piece set up above the corner
Outside bar table length: ca. 6.2 m
Inside bar table length: ca. 5.9 m
Operating staff: 1-2
Centrally placed bar with extended basic shape
The stretched bar shape allows for additional equipment and functional elements behind the counter, and more space for guests and staff. Complete equipping with bar units and/or gastro units, lighting and sound systems, heating and wind protection walls. Realizable in many standard sizes and special formats, along with individualized designs and furnishings. Ideal as part of a larger system with multiple large umbrellas – for instance, for full use of a patio area.
Technical details
6 umbrella types MV 6.0 x 4.0 m
Covered area: each 24 m², total 144 m²
Bar dimensions: 6.7 x 2.8 m
Outside bar table length: 17.8 m
Inside bar table length: 12.5 m
Total bar construction consisting of stainless steel
Bar panels with indirect lighting
Operating staff: 3-5 persons
Structure can be separated for transport
